Change security settings on airlink 101 wireless n router

CHANGE SECURITY SETTINGS ON AIRLINK 101 WIRELESS N ROUTER PASSWORD

The uplink device like a router or a switch can be connected to any ports on the switch, and the end-clients like computers can be connected to other ports, then the setup is done. When deployed, if the router functions are not going to be used, the cable from the ASA should be plugged into any available port except the WAN, or Internet, port. The unmanaged switch is only used to extend the Ethernet ports in the network, allowing more devices to access the network simultaneously. I recommend disabling the router functions and most definitely the DHCP functions since that will be handled by the ASA. It may also create difficulties for your successor if they are not as informed about networking. Using the Airlink as a router overly complicates the network. Running another router behind the ASA requires some understanding of network configurations and attention to configurations necessary to work with, and not conflict with, the ASA. Owner of the Airlink 101 Wireless N 300MBPS Router 10/100 Base-TX (RJ-45) AR686W are very satisfied with their purchase of the product. However, you can use it as a router if you want the WLAN to be separated from the wired LAN. Airlink 101 Wireless N 300MBPS Router 10/100 Base-TX (RJ-45) AR686W is a popular product and we recommend it to you. The security connection settings for the wireless router. If using a Cisco PIX 501 you can use the Ipconfig command from a networked computer to find the subnet mask. Click Home Network, then click LAN Interface, click LAN Interface Setting to set the LAN ip. The subnet mask should be the same as the ASA's. One of them is being able to accessing the Airlink once deployed (You would not otherwise know the IP address when assigned by the DHCP server of the ASA). Ceiling AP AC1200 Wave 2 Gigabit Access Point Explore i24. Outdoor CPE 5GHz 23dBi 11ac Outdoor CPE Explore O8. PoE Switches 24GE+2SFP Ethernet Switch With 24-Port PoE TEG1126P-24-410W. Unmanaged Switches 16-Port Gigabit Ethernet Switch TEG1016M. Having a static IP address has several advantages. PoE Switches 16GE+2SFP Ethernet Switch With 16-Port PoE TEG1118P-16-250W. This address is on a sticker on the ASA's case. router that supports this f eature, like the AR570W Airlink101 Wireless 150 Router. The IP address of the Airlink should be set to a static IP address and one of the five (5) after the Cisco ASA 5505 IP address. The setup should be done prior to deployment (direct wire connection to a computer) since you will not be able to access it through the ASA firewall with the Airlink default configuration settings. DHCP is enabled to use it as a router disabled as an access point.The settings for the IP address and subnet mask provided by jsfriedman in his attachment will not work when deployed behind the Cisco ASA 5505 (or Cisco PIX 501).

CHANGE SECURITY SETTINGS ON AIRLINK 101 WIRELESS N ROUTER PASSWORD

Jsfriedman wrote:Use the default IP 192.168.1.1 and default 'admin' password to configure it.

Change security settings on airlink 101 wireless n router